Some Alternative Ways Of Handling A Clogged Drain

Posted on

If you have a clogged drain, then there are a number of ways that you can approach the problem. However, the most obvious solution is not always the most effective. By tackling the issue from a different angle, you can save yourself time, money, and stress. Here are some alternative methods for unclogging your drains:

Try a Plumber's Snake

If a plumber isn't doing the job, then you might want to try a plumber's snake. These devices can be bought at just about any home improvement store and will help you make short work of your clog.

The general idea is that the snake should be inserted down the drain until it reaches the clog. The tip will work like a small drill, which will bore through the clog as you turn the snake. Once you have completely drilled through the clog, then water should be able to flow freely. If you are still having problems with the clog, then you can work backwards with the snake, rotating it as you pull it out, which should further disrupt the clog.

Try Stronger Chemicals

In the past, you might have tried hot water or baking soda and vinegar. If these didn't work, then there are much stronger and more potent liquid solutions that you can use to clear out your drains. However, these substances can be quite a bit more dangerous, which means that you will need to pay careful attention to exactly how you handle and store them.

Your normal store-bought drain cleaner can do the job, but you could actually create your own version of drain cleaner with some common chemicals. This can give you a better idea of how the process works and exactly how dangerous the cleaner is.

Ammonia is a popular choice, since a small amount of ammonia can be added to boiling water to create a cleaning solution that is great for busting clogs loose. A teaspoon of ammonia should be mixed into a gallon of water in order to achieve an effective ratio.

Safety Measures for Drain Cleaners

When blending the cleaner, make sure to protect your eyes, mouth, nose, and hands. Gloves, some goggles, and a respirator should be sufficient, since you just want to make sure that none of the solution splashes on you and that you don't inhale too much of the fumes.

Once the solution has been mixed, you don't need to be quite so careful, since it should be diluted and much less dangerous than the base chemicals. That being said, you still don't want to get any on your skin, and you definitely don't want to get any on your eyes or in your mouth.

For assistance, talk to a professional like Pipeworks Inc.